Wear inspection of tablet stamps
Press tools for the tablet production are subject to a continuous wear control. Due to complex geometries and strongly reflecting surfaces, optical inspections are only possible with ag8亚游集团 precision measuring techniques. A confocal sensor and an optical micrometer enable to inspect the tools in a special measuring machine. The press tools are tested for different parameters.
Color sensors monitor the ingredients of tablets
In pharmaceutical tablet production different ingredients are used. Changing the concentration of these ingredients affects the color of the tablet. The colorCONTROL ACS7000 inline color measuring system measures finely-graded color shades between white and beige. This color information provides a statement about the quality of the ingredient during the ongoing production.
Recommended sensor technologyag8亚游集团 Speed Photospectrometer colorCONTROL ACS7000
Displacement sensors for position monitoring in equipment manufacturing
For the measurement of a position, e.g. the movement of a patient couch, draw-wire displacement sensors are used. As positioning tasks typically require only medium accuracy, sensors with potentiometer outputs are suitable here. Extremely precise measurements, e.g. in computer tomographs with ag8亚游集团 sectional resolution require draw-wire sensors that offer a very accurate absolute or incremental encoder.
Filling level measurement trays
The narrow beam path enables the confocal sensors to measure in recesses. With the confocal measuring principle, measurements on liquids are possible, e.g. for precise filling level control in trays.
Recommended sensor technologyConfocal hybrid sensors for displacement, distance and position
Non-contact height measurement of culture media in Petri dishes
In microbiology, cell cultures are used for the analysis of so-called agar plates. When producing this culture medium, liquid agar-agar is filled into plastic Petri dishes, where it hardens and forms a gel-like, transparent layer. Capacitive displacement sensors from Micro-Epsilon inspect the height of the conductive culture medium with ag8亚游集团 accuracy.
One-sided thickness measurement of tubes
In the manufacture and quality assurance of medical products, the thickness of tubes and membranes as well as the wall thickness of balloons are measured. Confocal chromatic sensors are used which measure the thickness or layers of transparent materials from only one side.
Non-contact thickness measurement of gelatin layers
Gelatin is often used in the shell of soft capsules. For the 100% thickness measurement of the conductive gelatin layer, capacitive displacement sensors from Micro-Epsilon are used, which provide non-contact and precise thickness values.
Bottom thickness measurement of container glass
With the wall thickness and roundness measurements in star wheel inspection machines, a fast measuring rate is required in order to support the ongoing process. Micro-Epsilon’s confocal chromatic measuring systems provide a ag8亚游集团 measuring rate and fast exposure time control. This also enables the measurement of thickness when the glass colors vary.
Quality control of medical tablet stamps and dies
According to ISO 18084:2011, the press tools for the tablet production are subject to a continuous quality control. Due to complex geometry and a strongly reflecting surface, automatic inspection of stamps and dies has been difficult. Only the use of a confocal sensor (confocalDT 2451) and an optical micrometer (optoCONTROL 2600) together with a precise movement with 5 degrees of freedom enabled the development of »Ti-1«. Ti-1 is a complex measurement system equipped with a USB interface and special software for the geometric and visual inspection of tools.
Precise positioning of a surgical microscope
Surgical procedures require a perfect view of the operating area. Here, the surgeon is often supported by a surgical microscope. To enable the surgeon to best position the microscope and to give the surgical team more room to move, the microscope optics are mounted to long arms on a stand.
Request download linksApplication "Precise positioning of a surgical microscope" (PDF, 118 KB)
Measuring dental samples confocal
Confocal chromatic sensors are used to check the surface topography of dental samples. These sensors are distinguished by their ag8亚游集团 resolution and independence from the type of material surface involved. The desired area on the object being measured is marked by software. The system is used on surfaces such as plastic, paper, nonwoven fabric, glass or metal.
Recommended sensor technologyConfocal sensor systems for displacement, distance, position and thickness
Request download linksApplication "Confocal measurement of dental samples" (PDF, 138 KB)
Measurement of contact lenses
Contact lens manufacturers have a need to conduct various material tests on clear, flexible polymer samples. The material samples must be submerged during testing in a saline solution for hydration.
The ag8亚游集团ly sophisticated ThruBeam model ODC2600-40 is uniquely capable of making dimensional measurements with ag8亚游集团 accuracy and speed.
Request download linksApplication "Contact lens measurement" (PDF, 88 KB)
Position measurement in Computer Tomography (CT)
In the latest CT equipment, the most effective diagnoses are determined by how precise and fast the measurement systems are (speed and resolution), as well as their cost effectiveness. Irrespective of whether spiral, helical or dual source apparatus is used, the requirements are continuing to increase. In particular, this also concerns the length measurement equipment for the horizontal reclined position. In this application, draw-wire sensors from Micro-Epsilon achieve a resolution of up to 0.001% of the measuring range; this is combined with maximum reliability, long service life and a very favorable price/performance ratio.
Request download linksApplication "Position measurement in Computer Tomography" (PDF, 118 KB)
Positioning of operating tables
Operating tables provide many adjustment options for the correct positioning of the patient during the operation. As well as the height, the horizontal position and angle functions can also often be adjusted. As the positioning is performed electrically, the positions must be monitored. Draw-wire sensors from Micro-Epsilon are used for this.